Control PanelsLift supplyFireman's return
Lift Panel
The dedicated supply to a lift machine room, with the isolation, phase protection and fire-alarm interface the lift contractor asks for.
Rating plate
Lift Panel
- Compliance
- IS/IEC 61439-1 & 61439-2
- Supply system
- 415 V, 3 phase 4 wire, 50 Hz
- Rated insulation voltage
- 690 V
- Ambient temperature
- 45 °C
- Rated current
- 32 A to 250 A
- Isolation
- Lockable main switch, machine-room mounted
- Protection
- Phase failure, phase reversal, under/over voltage
- Supplies
- Lift drive, car lighting, shaft lighting, machine-room socket
- Fire interface
- Volt-free contact for fireman's return / evacuation
- Standby changeover
- Optional, essential-supply feed
- Degree of protection
- IP42 to IP54
Specifying this panel
Phase-reversal protection is not optional on a lift. A traction machine on reversed phases runs the car the wrong way, and the safety gear is what stops it.
Keep car lighting and shaft lighting on separate ways from the drive. Isolating the drive for maintenance must not put an engineer in a dark shaft.
Built for
- Passenger and goods lifts
- High-rise machine rooms
- Hospital bed lifts on essential supply
- Escalator and travelator supplies
Fitted with
The assembly is ours; the switchgear inside it is genuine, authorised-channel product from the makes you specify.
Control Panels
Other panels in this family.
Built to the same standard, and able to share a lineup with this one.
Air handling · VFD · BMS
AHU Control Panel
View more
Auxiliaries · Battery · Fuel
DG Aux Panel
View more
Operator desk · Mimic
Control Console
View more
Next step
Send us the single-line.
A drawing, a load list or a BOQ is enough to start. You'll get the ratings checked against the actual fault level, a general-arrangement drawing to approve, and a fixed price.