LT PanelsPMCCCombined
Power cum Motor Control Center
One board doing both jobs — outgoing power feeders on one section, motor starters on the next. The usual answer when there isn't room for two lineups.
Rating plate
Power cum Motor Control Center
- Compliance
- IS/IEC 61439-1 & 61439-2
- Supply system
- 415 V, 3 phase 4 wire, 50 Hz
- Rated insulation voltage
- 690 V
- Ambient temperature
- 45 °C
- Operational current
- Up to 4000 A
- Form of separation
- Form 3b / 4
- Sections
- Power distribution + motor control on a common bus
- Degree of protection
- IP42 to IP54
- Configuration
- Fixed & draw-out
Specifying this panel
A PMCC shares one busbar system between distribution feeders and starter modules. It costs less than a separate PCC and MCC and takes roughly two-thirds of the floor space.
The trade-off is coordination: a fault on a motor feeder and a fault on a power feeder now sit behind the same incomer, so discrimination has to be checked rather than assumed.
Built for
- Small and mid-size plant rooms
- Buildings with a single switchroom
- Utility blocks and pump houses
- Plant extensions with limited space
Fitted with
The assembly is ours; the switchgear inside it is genuine, authorised-channel product from the makes you specify.
LT Panels
Other panels in this family.
Built to the same standard, and able to share a lineup with this one.
PCC · 6300 A · Form 3b/4
Power Control Center
View more
MCC · 4000 A · Draw-out
Motor Control Center
View more
Chiller · AHU · BMS-ready
HVAC Panel
View more
8000 A · Dual bus
Double Busbar Panel
View more
Next step
Send us the single-line.
A drawing, a load list or a BOQ is enough to start. You'll get the ratings checked against the actual fault level, a general-arrangement drawing to approve, and a fixed price.